Installation Guide

INSTALLATION INSTRUCTIONS #39627
Please read carefully and save these instructions, as you may need them at a later date.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
1.TOP CAP
2.SCREW
3. GLASS SHADE
4. BULB
5. CAGE
6. SOCKET
7. POST ADAPTER
8. MOUNTING SCREW
9. WHITE WIRE
10. BLACK WIRE
11. GROUND WIRE
12. WIRE CONNECTOR
13. POLE
WARNING: Risk of Fire.
Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1. Pull out the outlet wire and ground wire from the pole(13).Make wire connections
--White wire (w/o marking) from light to White wire(9) from power source.
--Black wire (w/o marking) from light to Black wire(10) from power source.
--Loop the Ground wire(11) to pole(13) with wire connector(12).
2. Install bulb: (bulb not include)
(Please don’t exceed the maximum capacity that recommended on the sockets).
3. Insert glass shade(3) into cage (5).
4. Put the top cap (1) onto cage(5), then secure it with screw(2)
INSTALLATION IS NOW COMPLETED
CAUTION
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
P: 866-845-5451 • F: 866-816-6165
E: [e-mail] • www.acclaim-lighting.com