Installation Guide

IN31145ORB
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
1. OUTLET BOX
2. WHITE WIRE
3. BLACK WIRE
4. GROUND WIRE
5. WIRE CONNECTOR
6. GREEN SCREW
7. HEX NUT
8. MOUNTING SCREW
9. MOUNTING BAR
10. BOX SCREW
11. CANOPY
12. BALL NUT
13. METAL SHADE
14. SOCKET
15. SOCKET RING
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1. Thread two mounting screws (8) to the mounting bar(9) and secure with the hex nut(7).
2. Secure the mounting bar(9) with box screws (10) to the outlet box(1).
3. Pull out the outlet wire and ground wire from the outlet box(1).Make wire connections
--Ribbed /White wire (w/o marking) from light to white wire(2) from power source.
--Smooth /Black wire (w/o marking) from light to black wire(3) from power source.
--Loop the ground wire(4) to mounting bar(9) with a green screw(6).
4. Attach the canopy(11) against the outlet box(1),secure with the ball nut(12).
5. Put the metal shade(13) onto socket (14), then secure with socket ring (15).
6. Install bulb: (bulb not included)
(Do not exceed the maximum capacity that’s recommended on the sockets).
INSTALLATION IS NOW COMPLETED
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
Phone: [phone] • Fax: [phone]
Email: [e-mail] • www.acclaim-lighting.com
14
13
15
4
6
7
3
2
1
12
11
5