Instructions / Assembly

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor.
Turn off the main power at the circuit breaker before installing the fixture in order to prevent
possible shock.
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain
the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustration.
1. OUTLET BOX
2. WHITE WIRE
3. BLACK WIRE
4. GROUND WIRE
5. MACHINE SCREW
6. WIRE CONNECTOR
7. MOUNTING BAR
8. GROUND SCREW
9. HEX NUT
10. MOUNTING
SCREW
11. BACKPLATE
12. BALL NUT
13. SOCKET
14. GLASS
15. SPACER
16. SOCKET RING
17. SOCKET WRENCH
IN41325
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
ASSEMBLY AND INSTALLATION
1. Thread two machine screws (5) to the mounting bar (7) and secure with the hex nut (9).
2. Secure the mounting bar (7) to the outlet box (1) with mounting screw (10).
3. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.
--Ribbed wire (w/o marking) or white wire from light to White wire (2) from power source.
--Smooth wire (w/o marking) or black wire from light to Black wire (3) from power source.
--Attach the ground wire (4) to mounting bar (7) with a ground screw (8).
4. Attach the backplate (11) to the outlet box (1), secure with the ball nut (12).
5. Remove the socket ring (16) from the socket (13), then place the glass (15) and
spacer (15) over the socket (13). Replace the socket ring (16) and secure in place using socket
wrench (17).
6. Install bulbs: (bulbs not include)
(Don’t exceed the maximum capacity recommended on the sockets).
INSTALLATION IS NOW COMPLETED
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
Phone: [phone] • Fax: [phone]
E: [e-mail] • www.acclaim-lighting.com