Instructions / Assembly

P
Light Control
•Photocell keeps
the
lighting
off during
daylight
hours.
This package includes:
Light fixture
Cover
Plate
Gasket
2 Screws
Mounting Strap
Mounting Bolt
2 Wire
Connectors
•The light
control
requires
120-volts
AC.
• This product is
intended for
use with the enclosed gasket and with
a junction box
marked for use in
locations.
wet
Model LFL2WH/LFL2ABZ
hoto Cell
CAUTION
• The following instructions must be followed when installing this
light fixture in accordance with local construction codes in your
area. Failure to comply with these requirements could lead to
an electrical hazard.
• Before
starting the installation,
turn off the light switch and
the proper circuit breaker or remove the fuse at the fuse box.
• This light fixture must be earthed or grounded. If there are
only two (2) wires coming from the wall (main power) it means
that there is no
earth or ground and under no circumstances
should you attempt to wire this light fixture. Contact a qualify
electrician to install a proper earth facility before proceeding.
Rubber
Plug
Assembly and Installation Instructions
2