5331ValuMouseWirels 17/1/03 3:23 pm Page I ValuMouse™ Wireless 3 Button Installation Instructions
WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5331ValuMouseWirels 17/1/03 3:23 pm Page II
5331ValuMouseWirels 17/1/03 3:23 pm Page 1 Installation Instructions English Battery compartment Connect Button 1. Select channel I or II on the mouse 2. Plug the USB/PS/2 Receiver into your computer 3. Press the connect button on the top of the Receiver 4.
331ValuMouseWirels 17/1/03 3:23 pm Page 2 Installation Instructions Connecting your ValuMouse Wireless Your ValuMouse Wireless has a USB connector, which can work with both PCs and Macintosh® computers and a PS/2 adapter for PCs. Connecting to a PC Connecting to a Macintosh computer To connect to a Do this: To connect to a Do this: USB port Plug the cord into your computer’s USB port or a USB port on a hub connected to your computer.
5331ValuMouseWirels 17/1/03 3:23 pm Page 3 Installation Instructions English Installing the Software If you want to customise the use of the middle button, you need to install the software that accompanied the mouse. Please proceed to proper installation based on the version of Operating Software installed on your Computer: Installation software under Windows NT 3.5x and Windows 3.
5331ValuMouseWirels 17/1/03 3:23 pm Page 4 Installation Instructions Upon completion of software installation PS/2 users – When the mouse is connected to the PS/2 port, the ValuMouse Wireless software will automatically enable the middle button functionality (specific to the application being used) under Win 3.1x, Win95 and Win98, WinNT 3.5x and WinNT 4.0x.
5331ValuMouseWirels 17/1/03 3:23 pm Page 5 Installation Instructions Double click on the mouse icon on the desktop. This will bring up the Kensington ValuMouse Wireless control panel. Click on the pulldown menu, pick a function from the list provided and click on “OK” button. Refer to “readme” file on the software disc. ValuMouse Wireless • 5 English Under Windows 3.1x and NT 3.
5331ValuMouseWirels 17/1/03 3:23 pm Page 6 Trouble Shooting Trouble Shooting Symptom: Possible Causes: Symptom: Possible Causes: 6 • ValuMouse Wireless No mouse movement. (1) Make sure the mouse is securely plugged in the PS/2 or USB port. (2) Make sure you have installed Kensington ValuMouse Wireless software or the standard Microsoft mouse drivers included with your Windows operating system. The cursor on the screen remains at one spot or moves erratically.
5331ValuMouseWirels 17/1/03 3:23 pm Page 7 Warranty Information KENSINGTON TECHNOLOGY GROUP (”KENSINGTON”) warrants this PRODUCT against defects in material and workmanship under normal use and service for five years from the original date of purchase. KENSINGTON, at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty service.
5331ValuMouseWirels 17/1/03 3:23 pm Page 8 Kensington Technology Group Acco Brands Inc. 2855 Campus Drive San Mateo, CA 94403 USA www.valumouse.kensington.com Kensington is a registered trademark and ValuMouse Wireless is a trademark of ACCO World Corporation. Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer, Inc. All other registered or unregistered trademarks are the property of their respective owners.
