User Manual

Replace batteries in the remote, as indicated below.
Technical Support
Technical support is available to all registered users of Kensington products.
There is no charge for technical support except long distance charges
where applicable. Technical Support Contact information can be found on
the last page of this manual.
Connecting your Kensington Wireless Presentation Remote
To connect to a Do this:
USB port Plug the Presentation Remote
USB Receiver into your
computer’s USB port. You
may also use the spare USB
port on your keyboard or a USB
port on a hub connected to your
computer. You do not need to
turn off your computer before
connecting or disconnecting
a USB device.
About your Kensington Wireless Presentation Remote
The maximum range is 50 ft between the receiver and the remote.
The receiver has 2 separate indicator lights. A green light indicates that the
unit is connected properly to USB. A green flashing light indicates that the
remote is communicating with the receiver. A red flashing light indicates the
batteries are getting low and should be replaced as soon as possible.
The Kensington Wireless Presentation Remote should work up to one year
with the batteries that come with it. This is based on average usage. To
extend battery life when not in use, be sure to turn off the remote by inserting
the receiver into the remote.
Wireless Presentation Remote • 54 • Wireless Presentation Remote
33062_(901-0493-00)Print 7/1/03 1:14 PM Page 4