User`s guide

Accordiva SecuExpress User Guide – Standard Version
Connecting to remote camera to view live video
Make sure your PCs running SecuExpress Watcher and Remote are
connected to Internet.
In SecuExpress Remote, click
on the Control Bar or select
Command:Connect to set the connection options. In the Connect dialog
box, type the IP address and TCP port number of PC that SecuExpress
Watcher is running. (The TCP port value is defined in the dialog box of
Options:Remote Access of SecuExpress Watcher program.) If you want to
ave the IP address for reuse in the future, check Save to quick list to save
d
Press OK to connect to the remote camera on PC running
SecuExpress Watcher program to view live video.
For advanced settings in video data transmission, click Advanced
button in the Connect dialog box. In the Advanced Settings dialog box,
you can adjust video dimension to Half video size if the output size is set to
640 x 480 or above in Options:Video Capture Pin of SecuExpress
Watcher program. Select video quality for transmission by dragging the
s
to the quick list so that you can select from the Quick List drop down list an
do not need to retype each time.
Ty
of PC runni
Se
Wa
pe IP address
ng
cuExpress
tcher
Type TCP
value s
SecuExp
Watc
Remote A
dialog box
port
et in
ress
her’s
ccess
Ch
ch
sa
addr
Quick List for
future reuse
eck the
eckbox to
ve the IP
ess to
23