User's Manual

Advanced Configuration
6-17
6
Filter Control
The access point can employ network traffic frame filtering to control access to
network resources and increase security. You can prevent communications between
wireless clients and prevent access point management from wireless clients. Also,
you can block specific Ethernet traffic from being forwarded by the access point.
IAPP – Enables roaming between multi-vendor access points.
Local Bridge Filter – Controls wireless-to-wireless communications between clients
through the access point. However, it does not affect communications between
wireless clients and the wired network. (Default: Enabled)
• Disabled: Allows wireless-to-wireless communications between clients through
the access point.
• Enabled: Blocks wireless-to-wireless communications between clients through the
access point.
AP Management Filter – Controls management access to the access point from
wireless clients. Management interfaces include the web, Telnet, or SNMP.
(Default: Disabled)
• Disabled: Allows management access from wireless clients.
• Enabled: Blocks management access from wireless clients.