User's Manual

SNMP
6-37
6
CLI Commands for the System Clock – The following example shows how to
manually set the system time when SNTP server support is disabled on the access
point.
RSSI
The RSSI page displays the ambient noise floor for both radios A and G. These
values only apply to external used antennas. The displayed values are
non-configurable.
dBm – Decibel referenced to milliwatts.
SNMP
Simple Network Management Protocol (SNMP) is a communication protocol
designed specifically for managing devices on a network. Equipment commonly
managed with SNMP includes switches, routers and host computers. SNMP is
typically used to configure these devices for proper operation in a network
environment, as well as to monitor them to evaluate performance or detect potential
problems.
Managed devices supporting SNMP contain software, which runs locally on the
device and is referred to as an agent. A defined set of variables, known as managed
objects, is maintained by the SNMP agent and used to manage the device. These
objects are defined in a Management Information Base (MIB) that provides a
standard presentation of the information controlled by the agent. SNMP defines both
the format of the MIB specifications and the protocol used to access this information
over the network.
Enterprise AP(config)#no sntp-server enable 7-34
Enterprise AP(config)#sntp-server date-time 7-35
Enter Year<1970-2100>: 2003
Enter Month<1-12>: 10
Enter Day<1-31>: 10
Enter Hour<0-23>: 18
Enter Min<0-59>: 35
Enterprise AP(config)#