User's Manual Part 1

Installing the Wireless Barricade
8
System Requirements
You should meet the following minimum requirements.
• Internet access from your local telephone company or ISP
using an xDSL modem, Cable modem, ISDN TA, or PSTN
analog modem. You may also have access over the telephone
system to an analog modem at another site.
• A PC using a fixed IP address or dynamic IP address
assignment via DHCP, as well as a Gateway server address
and DNS server address from your service provider.
Item Description
LEDs Power, WLAN, WAN and LAN port status indicators.
(See “LED Indicators” on page 1.)
Wireless
Antennas
Dual antennas provide optimal reception by dynamically
choosing the best antenna for each client.
Reset
Button
Use this button to reset the power and restore the default
factory settings.
Printer
Port
Parallel port (25-pin, D-type, female). Connect the shared
printer to this port.
COM Port Serial port (9-pin, D-type, male). Connect your ISDN TA or
56K analog modem to this port.
WAN Port WAN port (RJ-45). Connect your Cable modem, xDSL
modem, or an Ethernet router to this port.
LAN Ports Fast Ethernet ports (RJ-45). Connect devices on your local
area network to these ports (such as a PC, hub, or switch).
Power
Inlet
Connect the included power adapter to this inlet.
Warning: The included power adapter is DC 9 V/1 A. Using
the wrong type of power adapter may cause damage.