User's Manual Part 2

Troubleshooting
88
LED Indicators
Link LED is Off
• Verify that the Wireless Barricade
and attached device are powered
on.
• Be sure the cable is plugged into
both the Wireless Barricade and the
corresponding device.
• Verify that the proper cable type is
used and its length does not exceed
specified limits.
• Be sure that the network interface
on the attached device is configured
for the proper communication speed
and duplex mode.
• Check the adapter on the attached
device and cable connections for
possible defects. Replace any
defective adapter or cable if
necessary.
Troubleshooting Chart
Symptom Action