User's Manual Part 2

Troubleshooting
90
Management Problems
Cannot connect using
the Web browser
• Be sure you have configured the
Wireless Barricade with a valid IP
address, subnet mask, and default
gateway.
• Check that you have a valid network
connection to the Wireless
Barricade and that the port you are
using has not been disabled.
• Check network cabling between the
management station and the
Wireless Barricade.
Forgot or lost the
password
• Press the “Reset” button for at least
five seconds on the rear panel to
restore the factory defaults.
Printer Server
The printer cannot
print or prints garbage
• Make sure the parallel cable
between the Wireless Barricade and
printer is connected and is in good
condition
Troubleshooting Chart
Symptom Action