Installation manual

Fast EtherHub-8se User’s Guide
Hardware Reference 4-7
Rear Panel
The rear panel on the hub includes 8 RJ-45 MDI-X station ports, 1 RJ-45 MDI
daisy-chain port, and a full-range power socket.
Figure 4.3 Rear Panel
RJ-45 Ethernet Ports
This hub includes 8 Fast Ethernet station ports on the rear panel; of which Port
8 can also serve as a daisy-chain port. Connect the MDI-X station ports to
network devices such as workstations or servers, and the MDI port to a network
interconnection device such as another hub or switch. Remember that you
cannot connect to Port 8MDI-X and Port 8MDI at the same time.
Note: Use Category 5 straight-through twisted-pair cable (STP or UTP) for all standard
connections. However, if you must cascade between MDI-X station ports on two hubs,
use crossover cable.
Power Socket
The power socket accepts AC power from 100 to 240V at 50 to 60Hz. The unit
is equipped with a universal full-range power source.