User guide

Configuring the CheetahAccess Internet Gateway
4-3
Networking and Client Services
Use the Setup menu to configure the LAN interface (including TCP/IP parameters
for the CheetahAccess Internet Gateway’s gateway address and DHCP address
pool for dynamic client address allocation), the WAN connection options, DNS
domain name mapping, and other advanced services.
You can use the Setup Wizard by clicking the “Enter” button at the bottom of the
page and changing the required settings, or you can select the specific items you
need to change from the Setup menu on the left side of the screen.
INFORMATION Displays the number of attached clients, the firmware
versions, the physical MAC address for each media
interface, as well as the hardware version and serial
number.
Security Log Displays any illegal attempts to access your network.
DHCP Client Log Displays information on all DHCP clients attached to your
network.
Tools Menu Contains options to reset the system, restore
configuration settings, or update system firmware.
Reset CheetahAccess Internet
Gateway
Reboots the system and retains all of your configuration
settings.
Restore Factory Settings Restores all configuration settings to the factory defaults.
Update Firmware Upgrades the system with the latest firmware obtained
from Accton’s website at www.accton.com.
Help Menu Contains information for product support, troubleshooting,
and network terminology.
Logout Button Exits the CheetahAccess Internet Gateway system.
Menu Description