User guide

Configuring Client TCP/IP
5-27
Manual IP Configuration
1. Select “Specify an IP address” in the “IP Address” tab. Select an IP address
based on the default network 192.168.2.X (where X is
between 2 and 254),
and use 255.255.255.0 for the subnet mask.
2. In the “Gateway” tab, add the IP address of the CheetahAccess Internet
Gateway (default: 192.168.2.1) in the “New gateway” field and click “Add.”
3.
In the “DNS Configuration” tab, add the IP address for the CheetahAccess
Internet Gateway
and click “Add.” This automatically relays DNS requests to
the DNS server(s) provided by your ISP. Otherwise, add specific
DNS servers
into the “DNS Server Search Order” field and click “Add
. ”
4. After finishing TCP/IP setup, click “OK,” and then reboot the computer. After
that, set up other PCs on the LAN according to the procedures described
above.