User guide

Troubleshooting
A-2
Management Problems
Cannot connect using the
Web browser
• Be sure you have configured the CheetahAccess Internet
Gateway with a valid IP address, subnet mask and default
gateway.
• Check that you have a valid network connection to the
CheetahAccess Internet Gateway and that the port you are using
has not been disabled.
• Check the network cabling between the management station and
the CheetahAccess Internet Gateway.
Forgot or lost the password • Press the Reset button on the front panel (holding it down for at
least five seconds) to restore the factory defaults.
Printer Server
The printer cannot print or
prints garbage
• Make sure the parallel cable between the CheetahAccess Internet
Gateway and printer is connected and is in good condition.
Symptom Action