User's Manual

–
30
–



Chapter3 | NetworkSettings 
Internet Settings


■
PPPoE—ToobtainanIPaddressfortheselectedEthernetinterfaceusing 
PPPoE,thefollowingitemsmustbespecified.

Figure20:IPAddre s sMode–PPPoE 



■
UserName—Theusernamespecifiedbytheserviceprovider. 
(Range:1‐32characters)

■
Password— Thepassword specifiedby theserviceprovider. 
(Range:1‐32characters)

■
ServiceName —TheservicenameassignedforthePPPoEconnection. 
Theservicenameisnormallyoptional,butmayberequiredbysome 
serviceproviders.(Range:1‐32alphanumericcharacters)

◆ IPAliases—AddsastaticIP v4addressunderwhichtheaccesspointcanalso 
bereac hed. 

Figure21: IPAlias 



◆ MTUSize—Setsthesizeofthemaximumtransmissionunit(MTU)forpackets 
sentonthisinterface.(Range:1400‐1500bytes;Default1500bytes)