User's Manual

–
33
–



Chapter3 | NetworkSettings 
LANSettings 





LANSettings 


TheLANSettingspageconfigurestheLANsettingsforthelocalnetworkandguest 
network,includingIPinterfacesetting,DHCPserversettings,STPadministrative
status,andUPnPadministrativestatus.

Figure24:Network–LANSettings 



Thefollowingitemsaredisplayedon thispage: 

◆ Members—Theinterfacesattachedtothelocalareanetwork.

◆ IPAddress—SpecifiestheIPaddressforthelocalnetworkorguestnetwork. 
ValidIPaddressesconsistoffourdecimalnumbers,0to255,separatedby 
periods.(Default:192.168.2.1)

◆ SubnetMask—Indicatesthelocalsubnetmask.(Default:255.255.255.0)

◆ MTUSize—Setsthesizeofthemaximumtransmissionunit(MTU)forpackets 
sentonthisnetwork.

◆ DHCPServer —Enables/disablesDHCPonthisnetwork.(Default:Enabled) 

■
DHCPSta rt—Firstaddressintheaddresspool.(Range:1‐256; 
Default:x.x.x.100)

■
DHCPMax—Maximumnumberofaddressesintheaddresspool. 
(Range:1‐255;Default:150)