User's Manual

–
13
–




Introduction 


Theaccesspoint(AP)runssoftwarethatincludesanetworkmanagementagent. 
Theagentoffersavarietyofmanagementoptions,includingSNMPandaweb‐
basedinterface.TheAPcanalsobeaccessedviaTelnetorSSHforconfiguration

usingacommandlineinterface(CLI).




ConfigurationOptions 
Theaccesspoint’swebagentallowsyoutoconfigureAPparameters,monitor 
wirelessconnections,anddisplaystatisticsusingastandardwebbrowsersuchas 
InternetExplorer9.xorlater,MozillaFirefox5orlater,andGoogleChrome35or 
later.TheAP’swebmanagementinterfacecanbeaccessedfromanycomputer 
attachedtothenetwork.

TheCLIprogramcanbeaccessedremotelybyaTelnetorSecureShell(SSH) 
connectionoverthenetwork.TheCLIisusedprimarilyfortechnicalsupport.

The AP’s management agent also supports SNMP (Simple Network Management 
Protoc ol).ThisSNMP agent permits the APtobe managed from anycomputer in 
thenetworkusingnetworkmanagementsoftware.

TheAP’swebinterface,consoleinterface,andSNMPagentallowyoutoperform 
managementfunctionssuchas: 

◆ Setmanagementaccessusernamesandpasswords

◆ Configure IP settings

◆ ConfigureSNMPparameters

◆ Configure2.4GHzand5GHzradiosettings 

◆ Controlaccessthroughwirelesssecuritysettings

◆ FilterpacketsusingAccessControlLists(ACLs) 

◆ Downloadsystem firmware

◆ Downloadorupload configuration files

◆ Displaysysteminformation andstatistics
1 