User's Manual

–
46
–



Chapter4 | WirelessSettings 
RadioSettings 


■
RoutetoInternet —ConfiguresaninterfaceasamemberoftheLAN. 
Trafficfromthisinterfaceisroutedacrosstheaccesspointandoutthrough 
aninterfacewhichisbridgedtotheInternet.(SeeFigure7,“Routeto 
Internet",onpage18.) 

■
NetworkName —Thenetworktoberouted.Thedefaultis“Default 
localnetwork”asdisplayedunderLANSettings–LocalNetwork. 

■
AddtoGuestNetwork —Thisinterfacecanonlysupporttheguest
network.


■
HotspotControlled —Thisinterfacecanonlysupporthotspotservices. 

■
ConfigureHotspot —OpensHotspotSettingspage. 

■
VLANTagTraffic —TagsanypacketspassingfromthisVAP(virtualaccess 
point)totheassociatedEthernetportasconfiguredunder“VLANSettings” 
onpage50.(Range:3‐4095) 

◆ LimitUpload—EnablesratelimitingoftrafficfromtheVAPinterfaceasitis 
passedtothewirednetwork.Youcansetamaximumra teinKbytespersecond. 
(Range:256‐10048576Kbytespersecond;Default:OFF)

◆ LimitDownload—Enablesratelimitingoftrafficfromthewirednetworkasit 
ispassedtotheVAPinterface.Youcansetamaximumrateinkbytesper 
second.(Range:256‐10048576Kbytespersecond;Default:OFF)

AdvancedSettings

◆ 802.11Rates—TheminimumdatarateatwhichtheAPtransmitspacketson 
thewirelessinterface.
Table3:802.11DataRates

Option  Rate(Max) Coding Method  Radio0(5GHz)  Radio1(2.4GHz) 
Auto  Auto  Basedonsignalstrength
√
√ 
1M 1Mbps CKK 

√ 
2M 2Mbps
CKK 

√ 
5.5M 5.5Mbps
CKK 

√ 
11M 11Mbps
CKK  √  √ 
6M 6Mbps OFDM
√  √ 
9M 9Mbps OFDM
√  √ 
12M 12Mbps OFDM
√  √ 
18M 18Mbps OFDM
√  √ 
24M 24Mbps OFDM
√  √ 
36M 36Mbps OFDM
√  √ 