User's Manual

–
48
–



Chapter4 | WirelessSettings 
RadioSettings 


Table3:802.11DataRates(Continued) 

Option  Rate(Max) Coding Method  Radio0(5GHz) Radio1(2.4GHz) 
NSS2‐MCS5 520Mbps 256‐QAM,doublestream √ 
NSS2‐MCS6 585Mbps 256‐QAM,doublestream √ 
NSS2‐MCS7 650Mbps 256‐QAM,doublestream
√ 
NSS2‐MCS8 780Mbps 256‐QAM,doublestream
√ 
NSS2‐MCS9 866.7Mbps 256‐QAM,doublestream
√ 

◆ TxStreams—Specifiesasinglestreamat20MHzoradualstreamat20MHz 
and40MHzforsignaltransmission.(Options:1,2;Default1)

◆ RxStreams—Specifiesasinglestreamat20MHzoradualstreamat20MHz 
and40MHzforsignalreception.(Options:1,2;Default1)

◆ TxPower—Adjuststhepoweroftheradiosignalstransmittedfromtheaccess 
point.Thehigherthetransmissionpower,thefartherthetransmissionrange. 
Powerselectionisnotjustatradeoffbetweencoverageareaandmaximum 
supportedclients.Youalsohavetoensurethathigh‐powersignalsdonot 
interferewiththeoperationofotherradiodevicesintheservicearea.
(Default:17dBmfor5GHzradio,27dBmfor2.4GHzradio)

Table4:TxPower

Power  Radio0(5GHz) Radio1(2.4GHz) 
0dBM(1mW)
√
√ 
4dBM(2mW)
√
√ 
5dBM(3mW)
√  √ 
7dBM(5mW)
√  √ 
8dBM(6mW)
√  √ 
9dBM(7mW)
√  √ 
10dBM(10mW)
√  √ 
11dBM(12mW)
√  √ 
12dBM(15mW)
√  √ 
13dBM(19mW)
√  √ 
14dBM(25mW)
√  √ 
15dBM(31mW)
√  √ 
16dBM(39mW)
√  √ 
17dBM(50mW)
√  √ 
18dBM(63mW)

√ 
19dBM(79mW)

√ 