User's Manual

QuickStart Guide
–
5
–





6. ConnecttotheWeb 
User Interface

Thestand‐aloneAPsofferaweb‐basedmanagementinterfaceforthe 
configurationofalltheunit’sfeatures.

YoucanmakeinitialconfigurationchangesbyconnectingaPCdirectlytotheAP’s 
ETH1RJ‐45port.TheAPhasadefaultmanagementIPaddressof192.168.2.1anda
subnetmaskof255.255.255.0.YoumustsetyourPCIPaddresstobeonthesame

subnetastheAP(thatis,thePCandAPaddressesmustbothstart192.168.2.x).

Logintothewebinterfaceusingthedefaultsettings:

◆ LoginName—root 

◆ Password—admin123 



Formoreinformationonstand‐aloneAPconfigurationusingthewebinterface,

refertotheManagementGuide.