User's Manual

QuickStart Guide
8
Professionalinstallationinstruction
1. Installationpersonal
ThisproductisdesignedforspecificapplicationandneedstobeinstalledbyaqualifiedpersonalwhohasRFand
relatedruleknowledge.Thegeneralusershallnotattempttoinstallorchangethesetting.
2. Installationlocation
Theproductshallbeinstalledatalocationwheretheradiating antennacanbekept20cmfromnearbypersonin
normaloperationconditiontomeetregulatoryRFexposurerequirement.
3. Externalantenna
Useonlytheantennaswhichhavebeenapprovedbytheapplicant.Thenonapprovedantenna(s)mayproduce
unwantedspuriousorexcessiveRFtransmittingpowerwhichmayleadtotheviolationofFCClimitand is prohibited.
4. Installationprocedure
Pleaserefertouser’smanualforthedetail.
5. Warning
Pleasecarefullyselecttheinstallationpositionandmakesurethatthefinaloutputpowerdoesnotexceedthe
limitsetforceinrelevantrules.Theviolationoftherulecouldleadtoseriousfederalpenalty.
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,
並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、
科學及醫療用電波輻射性電機設備之干擾。
此器材須經專業安裝並限用於固定式點對點操作。
本器材須經專業工程人員安裝及設定,始得設置使用,且不得直接販售給一般消費者。
「電磁波曝露量MPE標準值1mW/cm
2
,送測產品實測值為 0.736 mW/cm
2
To professional installer : Installer must disable UNII band 1 by tool when you install this device for outdoor
usage for complying with FCC rule.