User's Manual

Chapter 2: Planning 11
If you have a broadband Internet connection, but it is not working
during setup or the Setup Wizard cannot access your Internet
settings, you can enter the settings manually. For instructions, see
Chapter 6, or specific procedures in Chapter 3 that require this.
The base station was designed to share a broadband Internet
connection over a wireless network. If you want to set up a wireless
network without sharing an Internet connection through the base
station, it is recommended that you set up a network by using
wireless adapters only and no base station. For instructions, see
your adapter documentation.
None of my computers have Ethernet connections.
By using wireless adapters, you can connect all your computers to
the base station wirelessly, as shown in the following diagram. For
instructions, see page 20.
I want all my computers to connect to the base station
wirelessly.
You can switch a computer to a wireless connection to the base
station after first using it to set up the base station with a wired
connection. For instructions, see page 21.
Active Internet Connection
Broadband Modem
(DSL or Cable)
Second Computer
Wireless Notebook
Adapter Shown
First Computer
Wireless USB
Adapter shown
Wireless Base Station