User's Manual

Chapter 1: Introduction 3
Base Station Indicators and Controls
The preceding diagram shows the location of all ports, jacks,
controls, and indicator lights on the base station.
The base station contains two antennas, one internal and one
external. The external antenna is adjustable for best wireless
reception.
The front of the base station has seven green (and labeled)
indicator lights. After the base station is connected, these lights
will be on, off, or blinking, indicating the following states.
Light On Off Blinking
Power Receiving power Not receiving power Green or orange during
reset and restore
Modem Modem connected Modem off or Data being sent
and on not connected or received on modem
Wireless Radio enabled Radio disabled Wireless data being
status sent or received
Ethernet Ethernet device Ethernet device Data being sent or
status (4) connected and on off or not connected received over Ethernet
Resetting the Base Station
To reset the base station to correct temporary connectivity
problems, use a pointed object to briefly press and release the
reset button on the back of the base station, as shown in the
following illustration.
Important
Do not hold down the reset
button for more than five
seconds, unless you want to
erase all of your base station
settings and return them to
the factory defaults.
Resetting or Restoring the Base Station
Power Indicator
Light