User's Manual

Wireless PC Card
12
WEP - For more secure data transmission, set the “Use Wep” to “128 bit” or “64 bit”
to ensure wireless network security. The advanced Wired Equivalent Privacy (WEP)
is implemented in this card to prevent unauthorized access. The 128-bit setting gives
a higher level of security, but the setting must be the same as the other clients in your
wireless network. (Default: Disabled)
Authentication Algorithm - Set this to the same as the other devices in your
network. The devices use “Shared Key.” Devices from some other vendors use
“Open System.”
7. After driver installation, the system will prompt you to restart the computer. Click
“NO” if you want to continue installation for your network protocols and options.
8. Select the Services tab and Click “Add...” to install the network protocols you want to
use, such as IPX/SPX, NetBEUI or TCP/IP. If you install TCP/IP, be sure to set the
appropriate Gateway, DNS Server, and Domain for your network.
9. If you install an IPX/SPX-compatible protocol, then you also need to install the Client
for NetWare Networks.
10. Click on the “Identification” tab on the Network dialog box, and specify your computer
name and network workgroup.
11. Restart your computer.