User's Manual

Utility Configuration
13
Manual Entry – “Manual Entry” allows you to manually enter key elements (two
hexadecimal digits in each block, 0~9 & A~F, e.g., D7 0A 9C 7F E5.)
Default Key ID – Choose the Key ID that has the encryption string you prefer. If you are
using a key generated from the passphrase, you must use the same passphrase and key
on each station.
To use the WEP function, take the following steps:
1. Select “128-bit” or “64-bit” in the “Encryption” field.
2. Choose “Create with Passphrase,” type a string in the Passphrase field, and click
“Generate.”
3. Select the key, and click “Apply.”
Note:
A passphrase string can consist of up to 32 alphanumeric characters.
Or
1. Check “Manual Entry” and enter hexadecimal numbers into one of the key fields. The
bit key must be in hexadecimal numerals (0~9, A~F, e.g., D7 0A 9C 7F E5.)
2. Click “Apply.”