User's Manual

A-1
Appendix A: Troubleshooting
Diagnosing Access Point Indicators
Note: For information on troubleshooting wireless connectivity issues, refer to the
Management Guide.
Troubleshooting Chart
Symptom Action
PWR/SEATED LED is Off
• AC power adapter may be disconnected. Check connections between
the access point, the power adapter, and the wall outlet.
LAN LED is Off • Verify that the access point and attached device are powered on.
• Be sure the cable is plugged into both the access point and
corresponding device.
• Verify that the proper cable type is used and its length does not exceed
specified limits.
• Check the cable connections for possible defects. Replace the
defective cable if necessary.