System information

Configuring the Switch
2-21
Configuring the Switch
The Device Control menu is used to control a broad range of functions, including
port configuration, Spanning Tree, port mirroring, multicast filtering, and Virtual
LANs. Each of the setup screens provided by these configuration menus are
described in the following sections.
Device Control Menu
===================
Port Configuration ... Extended Bridge Configuration ...
Port Information ... 802.1P Configuration ...
Spanning Tree Configuration ... 802.1Q VLAN Base Information ...
Spanning Tree Information ... 802.1Q VLAN Current Table Information ...
Mirror Port Configuration ... 802.1Q VLAN Static Table Configuration ...
Port Trunking Configuration ... 802.1Q VLAN Port Configuration ...
IGMP Configuration ... Port Security Configuration ...
BStorm Control Configuration ... Port GARP Configuration ...
Port GMRP Configuration ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Menu Description
Port Configuration Sets communication parameters for ports.
Port Information Displays current port settings and port status.
Spanning Tree Configuration Configures the switch and its ports to participate in a local Spanning Tree.
Spanning Tree Information Displays the current Spanning Tree configuration for the switch and its ports.
Mirror Port Configuration Sets the source and target ports for mirroring.
Port Trunking Configuration Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
BStorm Control Configuration Allows you to enable/disable broadcast storm control on a per-port basis and
set the packet-per-second threshold.
Extended Bridge Configuration Displays/configures extended bridge capabilities provided by this
switch.
802.1P Configuration Configures default port priorities and queue assignments.
802.1Q VLAN
Base Information
Displays basic VLAN information, such as VLAN version number and
maximum VLANs supported.
802.1Q VLAN Current Table
Information
Displays VLAN groups and port members.
802.1Q VLAN Static Table
Configuration
Configures VLAN groups via static assignments, including setting port
members.
802.1Q VLAN Port ConfigurationDisplays/configures port-specific VLAN settings, including PVID and ingress
filtering.
Port Security Configuration Allows you to enable and configure port security for the switch.
Port GARP Configuration* Configures generic attribute settings used in the spanning tree protocol,
VLAN registration, multicast filtering.
Port GMRP Configuration* Configures GMRP multicast filtering.
* Not implemented in this firmware release.