System information

Firmware Upgrade Options
3-13
Firmware Upgrade Options
You can upgrade system firmware via a Web browser, a TFTP server, or a direct
connection to the console port.
Web Upload Management
Use the Web Upload Management menu to load software updates into the switch.
The upload file should be an CheetahSwtich Workgroup-3726M binary file from
Accton; otherwise the agent will not accept it. The success of the upload operation
depends on the quality of the network connection. After uploading the new software,
the agent will automatically restart itself. Parameters shown on this screen are
indicated in the following figure and table.
TFTP Download Management
Use the TFTP Download Management menu to load software updates into the switch.
The download file should be an CheetahSwtich Workgroup-3726M binary file from
Accton; otherwise the agent will not accept it. The success of the download
operation depends on the accessibility of the TFTP server and the quality of the
network connection. After downloading the new software, the agent will
automatically restart
itself. Parameters shown on this screen are indicated in the
following figure and table.
Parameter Description
Upload Mode Uploads to permanent flash ROM.
File Name The binary file to download. Use the Browse button to locate the file on your local
network.
Start Web Upload Starts uploading the file over the network.
Parameter Description
Server IP Address IP address of a TFTP server.
Download Mode The system downloads to permanent flash ROM.
File Name The binary file to download.
Start TFTP Download Issues request to TFTP server to download the specified file.