User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Network Planning
- Chapter 4: Initial Configuration
- Chapter 5: System Configuration
- Appendix A: Troubleshooting
- Appendix B: Cables
- Appendix C: Specifications
- Glossary
- Index
Initial Configuration
38
4
• Static IP – If you selected Static-IP, the following screen will appear. Fill in the
required settings, and then click Next.
Figure 4-7 WAN Setting (Static IP)
Field Attributes
• IP address assigned by your ISP – IP address of the WAN interface. Valid
addresses consist of four decimal numbers, 0 to 255, separated by periods.
• Subnet Mask – This mask identifies the subnet and host portion of the IP
address.
• Default Address – The IP address of the gateway router which is used if the
requested destination address is not on the local subnet, nor in any of the
routing tables.
• Primary DNS – The IP address of the Primary Domain Name Server on the
network. A DNS maps numerical IP addresses to domain names which can
be used to identify network hosts by familiar names instead of the IP
addresses.
• Secondary DNS – The secondary domain name server.