System information

Configuring the Logon Password

3-13

Manual Configuration

Web – Click System, LAN Settings. Enter the IP address, subnet mask and

gateway, then click APPLY. Note that if you change the switch IP address, you must

close the web interface and start a new session using the new IP address.

Figure 3-6 LAN Settings

Configuring the Logon Password

The administrator has write access for all parameters governing the onboard agent.

You should therefore assign a new administrator password as soon as possible, and

store it in a safe place.

Field Attributes

• Password – Specifies the user password.

(Range: 1-16 characters plain text, case sensitive)

Note:

If you cannot remember the password, you can restore the original settings by

following the procedure described in “System Defaults” on page 1-5.