System information

Static MAC
3-17
3
You can also manually configure static MAC addresses that are assigned to specific
ports on the switch. A static MAC address is bound to a specific port and will not be
moved or aged out. You can define up to 24 static MAC addresses on the switch.
Add Static MAC
Type the static MAC address and associated VLAN ID (1-4095) into corresponding
fields in the Add Static MAC table. After clicking the ADD button, a new page opens
to configure the Destination Mask for this MAC entry. Only one static MAC address
can be added at a time.
Static MAC Address Configuration
This table shows the stored static MAC entries in MAC table.
Web – Click System, Static MAC. Enter the MAC address, VLAN ID, then click ADD
button to add a new static MAC address.
Figure 3-13 Static MAC Address Configuration
Counter Config
This page allows specific statistics to be selected for monitoring. It is possible to
monitor up to five transmit counters and five receive counters, as well as 1 transmit
byte counter and receive byte counter.
Please also note the following restrictions.
• Received Unicast Packets can be enabled after Received Multicast Packets and
Received Broadcast Packets are enabled.
• Received Multicast Packets and Received Broadcast Packets can be disabled
after Received Unicast Packets is disabled.
• The above 2 rules are also applied to Transmitted Multicast Packets, Transmitted
Unicast Packets and Transmitted Broadcast Packets.