System information

Ports Configuration
3-25
3
Trunk Configuration
Field Attributes
• Trunk – Indicates trunk identification.
• Speed/Duplex – Allows you to manually set the port speed and duplex mode for
all ports in the trunk. (Default: Auto speed)
• Flow Control – Allows flow control to be enabled or disabled. When the box is
checked, flow control is enabled.
• Ports – Indicates which ports belong to the trunk.
Web – Click TRUNKS, Settings.
Figure 3-21 Trunk Configuration
Trunk Rate Limit
This page allows you to change the maximum input and output data rate for each
each trunk on the switch.
Field Attributes
• Trunk – Indicates trunk identification.
• Trunk Speed – Indicates the trunk speed.
• Enable Input Rate Limiting - Click to select the box to enable the Input Rate
Limiting function.
• Input Limit – Enter the desired limit. (percentage of port speed)
• Enable Output Rate Limiting – Click to select the box to enable the Output Rate
Limiting function.
• Output Limit – Enter the desired limit. (percentage of port speed)
• Ports – Indicates which ports belong to the trunk.