System information

Configuring the Switch
3-28
3
Web – Click VLANS, VLAN Settings. Fill in the required settings for each interface,
click Apply.
Figure 3-23 VLAN Settings
VLAN Memembership
The switch supports up to 255 VLANs based on 802.1Q standard. From the VLAN
Membership page you can create and delete VLANs, and change the VLAN port
membership.
Note:
For QinQ application, the number of VLAN groups that would be setup is equal to
the number of customer ports. Each VLAN group consists of two ports, customer
port and network port. The VID equals to PVID of the customer port. Network port
is member of the VLAN of customer port.