User Manual

System Configuration
5-8
5
Firmware Upgrade
The upgrade page allows you to download a new software code file from the local
web management station to the Mini AP Router using HTTP.
After upgrading to new software, you must reboot the Mini AP Router to implement
the new code. Until a reboot occurs, the Mini AP Router will continue to run the
software it was using before the upgrade started.
Figure 5-7. Firmware Upgrade
The displayed items on this page can be described as follows:
• Clear Configuration – Check the box to clear the current configuration when
uploading new firmware.
• Fireware image to upload – Specify the name of the code file on the local web
management station. You can use the Browse button to locate the image file locally
on the management station. Click Upgrade button to start the download process.
Be sure to allow enough time for the download to complete before rebooting the
Mini AP Router.