User's Manual

Interface Commands
6-67
authentication Defines the 802.11
authentication type allowed
by the access point
IC-W 6-84
encryption Defines whether or not WEP
encryption is used to provide
privacy for wireless
communications
IC-W 6-85
key Sets the keys used for WEP
encryption
IC-W 6-86
transmit-key Sets the index of the key to
be used for encrypting data
frames sent between the
access point and wireless
clients
IC-W 6-87
transmit-power Adjusts the power of the radio
signals transmitted from the
access point
IC-W 6-88
turbo Configures turbo mode to use
faster data rate
IC-W
max-association Configures the maximum
number of clients that can be
associated with the access
point at the same time
IC-W 6-89
multicast-cipher Defines the cipher algorithm
used for multicasting
IC-W 6-90
wpa-clients Defines whether WPA is
required or optionally
supported for client stations
IC-W 6-91
wpa-mode Specifies dynamic keys or a
pre-shared key
IC-W 6-93
wpa-preshared-key Defines a WPA
preshared-key value
IC-W 6-94
Command Function Mode Page