User's Manual

5-1
Chapter 5
System Configuration
Before continuing with advanced configuration, first complete the
initial configuration steps described in Chapter 4 to set up an IP
address for the SMC2552W-G.
The SMC2552W-G can be managed by any computer using a
web browser (Internet Explorer 5.0 or above, or Netscape
Navigator 6.2 or above). The SMC2552W-G Access Point is
DHCP enabled by default.
To log into the SMC2552W-G, enter the default user name
“admin” and password “smcadmin.” When the home page
displays, click on Advanced Setup. The following page will
display.