User's Manual

System Configuration
5-18
CLI Commands for 802.1x Authentication – Use the 802.1x
supported command from the global configuration mode to
enable 802.1x authentication. Set the session and broadcast key
refresh rate, and the re-authentication timeout. To display the
current settings, use the show authentication command from
the Exec mode.
SMC-AP(config)#802.1x supported 6-51
SMC-AP(config)#802.1x broadcast-key-refresh-rate 5 6-52
SMC-AP(config)#802.1x session-key-refresh-rate 5 6-53
SMC-AP(config)#802.1x session-timeout 300 6-54
SMC-AP(config)#exit
SMC-AP#show authentication 6-59
Authentication Information
=========================================================
MAC Authentication Server : REMOTE
MAC Auth Session Timeout Value : 300 secs
802.1x : SUPPORTED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1x Session Timeout Value : 300 secs
Address Filtering : DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
SMC-AP#