User's Manual

Radio Interface
5-49
current security settings, use the show interface wireless g
command.
SMC-AP(config)#interface wireless g 6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#authentication shared 6-83
SMC-AP(if-wireless g)#encryption 128 6-84
SMC-AP(if-wireless g)#multicast-cipher wep 6-89
SMC-AP(if-wireless g)#key 1 128 ascii abcdeabcdeabc 6-85
SMC-AP(if-wireless g)#transmit-key 1 6-86
SMC-AP(if-wireless g)#end
SMC-AP(config)#no 802.1x 6-51
SMC-AP(config)#end
SMC-AP#show interface wireless g 6-95
Wireless Interface 802.11g Information
==========================================================
----------------Identification----------------------------
Description : Enterprise 802.11g Access Point
SSID : r&d
Turbo Mode : OFF
Channel : 11 (AUTO)
Status : Enable
----------------802.11 Parameters-------------------------
Transmit Power : FULL (13 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 64 stations