User Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Getting Started
- Web Configuration
- Appendices
- Glossary
- Index
C
HAPTER
2
| Installing the ADSL Router
Connecting and Powering On
– 32 –
Figure 7: Wall Mounting Screws
CONNECTING AND POWERING ON
Connect the AC power adapter to the ADSL Router, and the power cord to
an AC power outlet.
C
AUTION
:
Use ONLY the power adapter supplied with this ADSL Router.
Otherwise, the product may be damaged.
1. Observe the Power LED – When you power on the ADSL Router,
verify that the Power indicator turns on, and that the other indicators
start functioning as described under “LED Indicators” on page 27.
2. Connect the Ethernet Cable – The ADSL Router can be connected to
a 10/100 Mbps Ethernet network through a device such as a hub or a
switch. Connect your network to the RJ-45 port on the back panel with
Category 5 or better UTP Ethernet cable. When the ADSL Router and
the connected device are powered on, the Ethernet Link LED should
turn on indicating a valid network connection.
N
OTE
:
The RJ-45 port on the ADSL Router supports automatic MDI/MDI-X
operation, so you can use straight-through cables for all network
connections to PCs, switches, or hubs.
Mounting Screws