User Manual

C HAPTER 5 | WAN Configuration
Channel Configuration
– 59 –
The following items are displayed on this page:
◆ Bridged Interface — Displays a virtual interface.
◆ Protocol — Displays the protocol used for transmission of data
packets.
◆ ATM VCC — Displays the virtual channel connection (VCC) to the
remote ATM switch formed by the combination of the VCI and VPI.
◆ Status — Allows the user to enable or disable the link.
◆ Mode — Allows the user to select the connection protocol, such as
PPPoE, or disable it.
◆ Apply Changes — Applies the user specified changes.
◆ Return — Returns to the previous creen without making changes.
◆ Undo — Undoes any changes to the connection made by the user and
restores the originals.
The example below shows an IP Interface.
Figure 25: Editing an IP entry in the Current ATM VC Table
The following items are displayed on this page:
◆ IP Interface — Displays the name of the virtual interface.