User's Manual

– 4 –

Quick Start Guide

Mounting the AP on the ceiling

If the room is equipped with a suspended ceiling, use the mounting plate provided

in the package to attach the AP to the metal ceiling T-bars.

The mounting plate supports two different sizes of suspended ceiling T-bars. The

position illustrated below is for 15 mm bars. Use the position at a 90 degrees angle

for 24.5 mm bars.

Suspended Ceiling Mounting

Press the retention clips of the mounting plate

against the ceiling T-bar.

Rotate the plate until the T-bar snaps into place.

Slide the rails on the back of the AP along the

sides of the ceiling mounting plate until it snaps

into its secured position.