SwitcHub-7s &INO
Installation Manual SwitcHub-7s Smart Ethernet Switch with 6 10BASE-T Ports and 1 10BASE-T/100BASE-TX Port
Copyright (c) 1996 by Accton Technology Corporation. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Accton Technology Corporation. Accton makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice.
Package Contents Carefully unpack the contents of the package and verify them against the checklist given below. Package Checklist æ SwitcHub-7s (Model No. ES2007-TX) æ AC power cord æ Four rubber foot pads æ Installation manual æ Owner registration card Please inform your dealer immediately should there be any wrong, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use them again to repack the unit in case there is a need to return it for repair.
Quick Installation The SwitcHub-7s contains six 10BASE-T RJ-45 Ethernet ports, and one RJ-45 port for either 10BASE-T or 100BASE-TX connection (detected by autosensing). Each of these ports support full-duplex or half-duplex operation. The smart design built into the front display panel and configure options provides a friendly interface that simplifies installation and network troubleshooting.
SwitcHub-7s User’s Guide For integrating legacy networks, Port 7 provides for connection via either 100BASE-TX or 10BASE-T. It uses auto-sensing to dynamically set the required transmission speed at 10 or 100 Mbps. 5. The SwitcHub-7s can serve as a collapsed backbone, or can be connected to any other network interconnection device via one of the 10 Mbps ports or the 100 Mbps port. (Refer to Chapter 3 for sample applications.) 6.
About this Guide This guide is designed for the experienced network installer. It describes how to install and operate Accton’s SwitcHub-7s Smart Ethernet switch. After reading this manual, you should be able to use the front display panel and configure options to manage all your network connections.
Contents Chapter 1: Product Overview ................................................. 1-1 Switching Technology...............................................................................................1-1 Accton’s SwitcHub-7s...............................................................................................1-2 Switching Methods...............................................................................................1-3 Basic Features.....................................................
SwitcHub-7s User’s Guide Chapter 4: Hardware Reference............................................. 4-1 Indicator Panel ..........................................................................................................4-2 Configure Button ..................................................................................................4-3 CPU Activity Indicator.........................................................................................4-4 Port Speed Indicator ..........................
SwitcHub-7s User’s Guide Appendix C: Specifications.................................................... C-1 Product Specifications...............................................................................................C-1 Appendix D: Standards Compliance ..................................... D-1 EMI Certification ......................................................................................................D-1 FCC Class A.......................................................................
SwitcHub-7s User’s Guide List of Figures Figure 3.1 Figure 3.2 Figure 3.3 Figure 3.4 Figure 4.1 Figure 4.2 Figure 4.3 Figure B-1 x SwitcHub Used as Simple Backbone .....................................................3-1 SwitcHub Used as Multiport Bridge ......................................................3-2 SwitcHub Used to Link High-Bandwidth File Servers...........................3-3 High-Speed Link between Switches.......................................................