User's Manual Part 2

U TILITY I NSTALLATION (98/M E /NT/2000)
29
Firmware Version – Current firmware version.
SSID – Clients in your network must use the same value entered
here. (Default: WLAN)
Channel – Set the operating radio channel number. (Default: 11)
Note: Available channel settings are limited by local regulations
which determine which channels are available. (FCC/IC:
1-11, ETSI: 1-13, France: 10-13, Spain: 10-11, MKK: 1-14)
RTS Threshold – Set the RTS Threshold to enable the RTS/CTS
mechanism. (Default: 2,346 which means Disabled)
Accept ANY SSID – Checking this box enables the access point
to accept the association of wireless clients using ANY as their
SSID. If this feature is disabled (the box is not checked), the
wireless clients must use the same SSID as the access point.
(thus enhancing security)
IP Address – Set the IP address as required.
(Default: 192.168.2.254)
Subnet Mask – Set the Subnet Mask as required.
(Default: 255.255.255.0)
Default Gateway – Set the default gateway as required.
(Default: 0.0.0.0)