User Manual

009-10602-A Legra Radio Installation Guide
Overview 3
Legra Systems Inc. Proprietary and Confidential
connected to a Legra Switch, the Legra Radio downloads software
from the Legra Switch.
Figure 1-2 Legra Radio Aft Connectors
You can also connect the Legra Radio to a third-party vendor’s switch
and manage the Legra Radio from a Legra Switch through your
network. During the Radio’s initial configuration, you must imprint the
Legra Switch’s DNS information on the Legra Radio. For more
information, see “Imprinting a Legra Radio” on page 20.
If your third party switch does not support PoE, you can use an inline
power injector to power the Legra Radio, or connect a Legra power
brick to the 5V DC Power Socket.
Power over Ethernet (PoE) Compatibility
The Legra Radio is Power over Ethernet ready in accordance with
IEEE 802.3af. The Legra Radio has a RJ-45 10/100 Ethernet connector