User Manual

009-10602-A Legra Radio Installation Guide
Overview 11
Legra Systems Inc. Proprietary and Confidential
LR11b Radio Configuration
When a LR11b radio is initially connected to a switch, the Legra
Radio’s interface is inactive. The following steps describe how to
provision and activate the interface.
1 If the Legra Radio is connected to a third party switch, configure
your network so that IP packets are routed to and from the Legra
Radio to the Legra Switch across your network.
2 Determine the radio channel settings for the Legra Radios. You can
use the LM6000’s Automatic Optimizer to calculate the channel of
the connected LR11b radios. After performing the calculation, the
LR11b radios are operational.
3 Make any modifications to the calculated channels and
transmission power.
4 Enable the radio interface on the Legra Radios from the LS2012
user interface or LM6000 NMS.