User Manual

16 Installation Guidelines
Legra Systems Inc. Proprietary and Confidential
Legra Radio Installation Guide 009-10602-A
Installation Guidelines
Use the following guidelines when determining the location of the
LR11b radios:
• In general, the best location is in the center of your wireless coverage
area within line of sight of all wireless devices.
• The higher off of the floor you install the Legra Radio, the better the
performance.
• Metal objects can obstruct the radio signal. Install your Legra Radio
away from large steel structures such as shelving units and filing
cabinets to ensure that the steel objects do not obstruct the radio
signals to and from your Legra Radio.
• Operation of electromechanical devices, such as room fans or
microwave ovens, can interfere with the radio signal. Locate your
Legra Radio away from electromechanical devices to ensure that the
radio signal is not interfered with during operation.
• Each Legra Radio should to be mounted with the provided mounting
hardware.
• Legra Radios are connected to the LS2012 using standard category 5
cabling (less than 100 meters).
• If your third party switch does not use PoE or an inline power
injector, use a power brick to power the Legra Radio. The power
brick must be located within a 2 foot radius of the Legra Radio.