User Manual
Table Of Contents
009-10602-A Legra Radio Installation Guide
Mounting Instructions 19
Legra Systems Inc. Proprietary and Confidential
CAUTION Do not install the Legra Radio upside down. Otherwise, damage to the
unit may occur.
If you are installing the Legra Radio on a vertical surface, ensure that
the top mounting flanges are oriented up or to the side. The bracket’s
mounting flanges support the weight of the Legra Radio.
To install the mounting bracket
1 Mark the locations of the four mounting holes using the mounting
bracket as a template.
2 If using the wall anchors, install the wall anchors in the four
mounting hole locations.
3 Install the mounting bracket using four screws.
The mounting bracket is installed.
Attaching the Legra Radio to the Mounting Bracket
You can connect the Legra Radio to the mounting bracket with the
following procedure.
To attach the Legra Radio to the mounting bracket
1 Install the Legra Radio’s aft mounting slots on to the mounting
flanges. Be sure that the LR11b hooks engage the bracket slots.
2 Press the front of the Legra Radio to secure it to the mounting
bracket. You should hear the Legra Radio snap into place.