User Manual

Using the Setup Wizard
4-9
4
•Pin Code: Specifies a PIN code number that corresponds with that set on your 3G/
3.5G USB modem and displays the status of the 3G connection.
- Not dial yet: Indicates that the PIN code has not been entered or is incorrect.
- Authenticated successfully: Indicates that the 3G connection has
authenticated successfully.
•Dial Code: A dialled access code that connects the USB device to the service
provider.
• APN Service: The name that uniquely identifies the cellular operator, access point
name (APN).
•3G Username: The username of the account registered with the service provider.
• 3G Password: The password of the account registered with the service provider.
PPTP
Enable the Point-to-Point Tunneling Protocol (PPTP) for implementing virtual private
networks. The service is provided across the internet in the European countries. The
dual WAN option is disabled in the following example.
Figure 4-12. Setup Wizard - WAN PPTP
• PPTP Network Mode: Sets a PPTP network mode. (Default: DHCP)
• IP Address: Sets the static IP address. (Default: 0.0.0.0, available when PPTP
Network Mode is set to static IP.)
• Subnet Mask: Sets the static IP subnet mask. (Default: 255.255.255.0, available
when PPTP Network Mode is set to static IP.)